Product Details:
Payment & Shipping Terms:
|
| Phase: | Single Phase | Enclosure Protection Grade: | IP54 |
|---|---|---|---|
| Rated Output Power: | 0.37KW-2.2KW (0.5HP-3HP) | Trip Response Time Of Over Load: | 5sec-5min |
| Recovery Time Of Over Load: | 30min | Trip Response Time Of Dry Run: | 6sec |
| Recovery Time Of Dry Run: | 30min | Trip Voltage Of Over Voltage: | 115% Of Rated Input Voltage |
ntelligent Pump Motor Protector is an easy to use, programmable protection device for direct start,single phase deep well submersible pump, centrifugal pump, pipeline pump motor etc with output power from 0.37KW-2.2KW (0.5HP-3HP)
① the Characteristic of Inverse-time, the stronger of the current, The shorter of trip response time)
② Percent of rated input voltage ( i.e if the rated input voltage is 220V, the Over voltage trip is 253V, the Under voltage trip is 187V)
③ Percent of load time of calibration ( i.e if the running ampere of pump motor is 10A during the calibration, the dry running trip ampere is 7A)
④ Percent of load time of calibration ( i.e if the running ampere of pump motor is 10A during the calibration, The over current trip ampere is 12.5A)
⑤ Percent of load time of calibration ( i.e if the running ampere of pump motor is 10A during
the calibration, The pump stalled trip ampere is 20A)
| Main technical data | |
| Start type | Direct on line |
| Qty of controlled pump | Single pump |
| Rated input voltage: |
AC220V-240V Single phase 50HZ/ 60HZ |
| Rated output power: | 0.37kw-2.2kw (0.5hp-3hp) |
| Capacitor: | Reserved space for installing start capacitor |
|
Protection Offered: |
Over load protection Pump stalled protection Dry run protection with sensor free Under voltage protection Over voltage protection Memory function when power off&recovery LCD displaying pump running status Push button calibration |
| Main installation data | |
|
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H) |
-25℃-- +55℃ 20%--90%RH, no drips concreted IP54 Wall mounting 1 52× 1 25× 70mm |
Single Pump Motor Control Panel , 3 Phase Mobile Operated Water Pump Starter
AC220V Simplex Pump Controller Wall Mounting With Auto / Manual Control
IP54 Protection Grade Simplex Pump Controller With Input Voltage 220V , Output Power 0.5-3HP
Smart Simplex Pump Controller Special Design For Installing Two Capacitor
L922 Duplex Pump Controller , Single Phase Pump Controller Under Voltage Protection
Three Phase Duplex Booster Pump Controller AC380V Input Voltage With ABS Enclosure
Intelligent Duplex Pump Controller Dry Run Protection For Sewage Pumping System
Ac380v 50hz Duplex Pump Controller For Waste Water Tank / Sewage Sink
IP54 Pump Motor Starter Protector , Single Phase Pump Starter Pump Stalled Protection
Intelligent Water Well Pump Motor Starter For Programmable Protection Device
Mobile Operated Water Pump Starter , Submersible Pump Auto Starter For Pharmaceutical
Digital Intelligent Pump Motor Starter Protector Single Phase With AC220V Input Voltage
