The submersible pump integrated controller is suitable for the protection and control of submersible WQ sewage pump, QXG clean water pump, ZQB axial flow pump, and HQB mixed flow pump. Or all other similar water pumps, such as Kaiquan, Kaishili, ABS, etc.
Scope of application
The controller is panel-mounted and can work normally under the following conditions:
The ambient temperature does not exceed +40 degrees, the average temperature within a 24-hour period does not exceed +35 degrees, and the lowest ambient temperature must not be less than -10 degrees.
There should be no excessive dust, acid, salt, corrosive gas in the air, and the relative humidity should not exceed 50% when the highest temperature is +40 degrees. A higher relative humidity is allowed when the temperature is reduced.
For example: when the humidity is below 20 degrees, the humidity is 90%. Beware of condensation that may happen occasionally due to temperature changes.
The altitude of the installation site does not exceed 1000 meters.
The vertical installation inclination shall not exceed 5 degrees.