In view of the above-mentioned shortcomings of the prior art, the purpose of the present utility model is to provide a method that can predict in advance what failures may occur in the equipment at a certain time through analysis, and perform maintenance in advance when the pump is sleeping, so that the pump can be used when needed. , An IoT smart water pump that runs continuously.
In order to achieve the above purpose, the present utility model provides the following technical solutions:
An IoT intelligent water pump includes a motor and a pump body installed on the motor. The motor includes a motor housing, a stator, a rotor, a rotating shaft, a front end cover, and a rear end cover. In the middle of the end cover, the front end cover and the rear end cover are respectively fixedly installed with the rotating shaft through the front bearing and the rear bearing. The pump body includes a pump casing and a pump cover. The pump casing is provided with water inlets and outlets. The pump cover is fixedly installed on the front cover The rotating shaft passes through the pump cover and extends into the pump housing. The impeller is installed on the rotating shaft in the pump housing. The single-chip microcomputer is fixedly installed on the motor housing. The stator, front bearing, rear bearing or/and the motor housing close to the stator The inner wall, the front end cover close to the front bearing, and the rear end cover close to the rear bearing are respectively provided with temperature sensors connected to the single-chip microcomputer. The single-chip microcomputer is provided with signal sending and receiving modules for connecting with the remote PC terminal and the APP on the mobile terminal.
The utility model is further configured as follows: the water outlet is provided with a flow sensor connected with the single-chip microcomputer.
The utility model is further arranged as follows: a mechanical seal is arranged on the rotating shaft between the pump cover and the impeller.
The utility model is further configured as follows: the mechanical seal is provided with a probe connected with the single-chip microcomputer for detecting leakage.
The utility model is further configured as follows: the pump cover is provided with a probe connected with the single-chip microcomputer for detecting leakage at a position close to the mechanical seal.
By adopting the above technical scheme, the technical effect achieved by the utility model is: the central processing system of the single-chip microcomputer is connected with the network communication system, which enables the APP on the computer (PC) and mobile phone (mobile) to realize remote monitoring and network coverage The information on the pump parameters, configuration and usage conditions used in the system is convenient for property, maintenance and pump manufacturers to analyze the operating parameters and usage conditions of the pumps, shortening and simplifying the maintenance and maintenance time. At the same time, the equipment can be predicted in advance through analysis. What kind of failure occurs at a certain time, maintenance is carried out in advance when the pump is dormant, so that the pump can run uninterrupted when it needs to be used.