Duplex Alternating Three Phase Pump Controller

Duplex Alternating Three Phase Pump Controller

Rated Input Voltage:AC380V / Three Phase
Rated Frequency:50Hz-60Hz (at option)
Open Phase Trip Response Time:2sec

Chat Now
Product Introduction

Duplex Alternating Three Phase Pump Controller

22


Product Details:


Place of Origin:China


Brand Name:LEADING


Certification:CE


Model Number:L932-S


Payment & Shipping Terms:


Minimum Order Quantity:1 set


Price:Negotiable


PackagingDetails:Carton


Delivery Time:30-35 days


Payment Terms:D/A, L/C, D/A, D/P, T/T


Supply Ability:5000 Pcs / Each Month



Detailed Product Description

Phase:

Three Phase

Pump Controlled Quantity:

Two Pumps

Enclosure Protection Grade:

IP54

Install Position:

Wall Mounting

Displaying :

LCD Display

Liquid Level Transfer Distance:

≤1000m


General Description

Intelligent Three Phase Duplex Sewage Pump Controller AC380V Input Voltage , DOL Start Type , One Button Calibration.

L932-s Sewage Pump controller ,is a smart and intelligent three phase fully automatic pump controller with built-in water level control .

It is very useful in water and waste water applications,The unit features an advanced microprocessor controller bonded to the PCB boards within the enclosure. The unit will support two Three phase 380 VAC pumps rated up to 15KW.

The controller unit is housed in a tough IP54 rated plastic enclosure with a LCD displaying front so that various status indicators may be viewed. This allows routine pump checks and maintenance to be carried out without the presence of an electrician. (Installation and maintenance of all electrical components will still require the presence of a qualified electrical contractor.)


Other Features

●Should tank levels become too high or too low, different audible and visual alarms will be triggered for the duration of the fault. A single or double flash will indicate the fault type.

●The audible alarm may be muted as per setting time by briefly pressing an ‘STOP ‘Mute button on the front side of the cabinet.

●The two motors will operate alternately with each cycle to distribute wear evenly. Should one pump motor fail, the unit will automatically restart using the alternate pump motor.

●When one pump or pipe get broken ,can disable one pump then alternation into other pump as running pump always.

●Pump start delay time and pump stop delay time can be adjustment by user.


Main Technical Specifications

All of parameters can be define in advance

■Rated Input Voltage……………………………………AC380V / Three Phase

■ Rated Frequency…………………………………………50Hz-60Hz (at option)

■ Rated Output Power of Motor……………0.75-4KW / 5.5-11KW/15KW(at option)

■ Open Phase Trip Response Time…….……………………2sec

■ Short Circuit Trip Response Time……………………………………………0.1sec

■ Dry Running Trip Response Time………………………………………………6sec

■ Over / Under Voltage Trip Response Time……………………………………5sec

■ Pump Stalled Trip Response Time……………………..………0.5sec

■ Over Current Trip Response Time……………………………………5sec-5min

■ Recovery Time of Over / Under Voltage……………………………………2min

■ Recovery Time of Over Current…………………………………………30min

■ Recovery Time of Dry Running.………………………………………………30min

■ Over / Under Voltage Trip……..……………………………….………………±15%

■ Dry Running Trip……………………………………………….70%

■ Pump Stalled Trip………………………………………….……………………200%


Comparison Of Features&Protections

Comparison of features&Protections

Our digital controller

Traditional controller

Multi application in same
panel

Application can be set
for drainage,pressure
boosting or water
transfer

customer needs to define
in advance

Pumps run in alternation
and also parallel if required

Yes ,pumps alternation on
every start cycle

in most cases it is done
as per timing

If one pump fails

Second pump starts&
give an alarm

Second pump doesn't start,
alarm,system needs to be
put in manual mode

Sensor less dry running

Yes

No

Digital displaying of voltage

Yes

Mostly analogue

Digital displaying of current
consumption of pump

Yes

Mostly analogue

Current overload protection

Yes

Yes

Setting under&over voltage

Yes

No

Displaying on faults on screen
in text form

Yes

No

Common controller for rating from
0.75-4kw/5.5-11kw/15kw

Yes

No

Audio alarm in case fault

Yes

No

Setting recovery time
from dry run

Yes

No

Auto recovery from supply faults

Yes

No

Auto/Manual Mode

Yes

Yes

Last five faults records

Yes

No

Run hours of each pump

Yes

No

BMS connectivity

By default RS485

Only in some cases with
potential free contacts


About Us

Leading Science & Technology company has been providing pump control and protection solutions to pump users.

Business Type : Manufacturer Exporter

Main Market: South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Middle East, Africa, Oceania, etc.

Tag: duplex pump control panel, duplex alternating pump controller

Hot Tags: duplex alternating three phase pump controller, China, manufacturers, suppliers, factory, price, made in China, pump controller for dustproof, heavy duty pump controller, pump controller for availability analysis, pump controller for iot enabled systems, pump controller for maintenance schedules, pump controller for dc

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag