Knowledge

We believe that the evolution of smart water pumps is divided into three versions. Smart water pump 1.0, can observe and record the current, voltage, pressure and other parameters of the water pump on

The system can use one or more water pumps. When one water pump is used, the float switch floats up and down with the liquid level in the sump. When the float is at the pump-on water level, the float

Water pumps are more common in daily life. They are mostly used in places such as water sources and construction sites to guide low or distant water to designated places. At present, the traditional w

In view of the above-mentioned shortcomings of the prior art, the purpose of the present utility model is to provide a method that can predict in advance what failures may occur in the equipment at a

Generally, the diagnosis of fire pump faults is a key link in the process of fire pump maintenance. The following are several common faults and elimination measures for you to diagnose fire pump fault

The correct maintenance and maintenance of the water pump can maintain the normal use of the water pump, and can extend the use time of the water pump to ensure the safety of users. Hangzhou water pum

In general, water pumps can be connected in parallel. There are many benefits of parallel connection of water pumps. It may be able to ensure the continuous operation of the entire working condition a

Since the motor is required to start when the liquid level is high and stop when the liquid level is low, a float is required to calibrate two liquid levels, high and low. The usual practice is to use

The intelligent pneumatic water pump uses a screw air compressor to compress the air, and then delivers the compressed air to the pneumatic dewatering pump control box. The pneumatic dewatering pump c

A reasonable height difference between the high and low liquid levels should be maintained. If it is too large, it may cause poor drainage; if the drop is too small, the motor will frequently start an

The Internet of Things technology we developed is based on the Internet of Things monitoring system for electromechanical equipment and power equipment.

In fact, the level gauge is not much different from the traditional float control. The level gauge is equivalent to several integrated floats. Familiar with float control, level control is naturally n