The company's pump station monitoring center remotely monitors the water level or inbound pressure of the clean water tank in the station, the working status of the booster pump set, the outbound flow, the outbound pressure, etc.; it supports manual control, automatic control, and remote control of the booster pump set. Start and stop; during optical fiber communication, the panoramic view and important stations in the station can be monitored with images, so that the pump station is unattended.
The remote monitoring system of the pumping station is mainly composed of the dispatching center, the monitoring center of the pumping station, the communication platform, the remote measurement and control terminal of the pumping station, the measurement measurement and the camera equipment.
Two communication platforms are commonly used. One is wired communication: optical fiber communication is leased between each booster pump station and the management office, and the dispatch center, pump station monitoring center, and various functional departments communicate through the local area network. The communication platform can transmit continuous images . The second is wireless communication: each booster pump station communicates with the dispatch center through the GPRS wireless network, and the dispatch center, pump station monitoring center, and various functional departments communicate through the local area network. The communication platform cannot transmit continuous images.
The functional characteristics, product structure and application requirements of the remote monitoring terminal of the pumping station.
1. Features of remote monitoring terminal for pumping station:
◆ Collect the inlet pipeline pressure or the water level of the clean water tank, the outlet pressure, and the outlet flow.
◆ Collect the start-stop status, working current, working voltage, electric energy and other electrical parameters of each booster pump.
◆ Collect the switch status and electric energy of each circuit in the power distribution room.
◆ In the case of optical fiber communication, the image monitors the panoramic view of the pump station, the electrical room, the pump room and other important stations.
◆ It supports manual control, automatic control, and remote control of the start and stop of the pressurized water pump, and the control mode can be switched.
◆ According to the water supply pressure and the running time of the pump, intelligently select the pump to put into operation.
◆ In the event of excessive current, lack of phase, low or high water level, control cabinet protection, power distribution room failure, and entry of idlers, the information shall be reported immediately.
◆ Support wireless communication methods such as optical fiber communication, LAN communication, GPRS, short message, etc.
◆ Store, display, and query pump station monitoring data and working parameters.
◆ Support multi-channel image monitoring. (Wired communication method)
◆ Support on-site and remote maintenance of measurement and control equipment.