The traditional water pump control method has complicated internal wiring, which makes it difficult for the maintenance personnel to debug the equipment and find the wrong wiring, and the function is generally single, and the intelligent transformation cannot be connected to the system, which increases the subsequent equipment investment.
The intelligent water pump controller integrates the electrical components required for water pump control, including voltage and current display, multi-function protector, electric hand automatic switch, start-stop button, water level and water pump status indication in one. The traditional water pump control method, in the traditional water pump control circuit, usually the main circuit breaker contactor and thermal relay constitute the control circuit, generally composed of indicator lights, instrument control buttons, transfer switch thermal relay, time relay and so on. The operator must inspect the site to find the problem, and the water pump failure often occurs when the personnel are not on the spot.
The intelligent water pump supports independent switch settings and backup rods, only alarms and does not trip, which meets the requirements of underground garages, fire hydrants and other fire-fighting applications. The secondary wiring diagram of the intelligent water pump controller is simpler than traditional methods, but has simple wiring and powerful functions. Advantages such as convenient later upgrade. The safe operation of all pumps in the unit can be controlled by using a mobile phone. It has the control mode support for different conditions of the equipment water level, and supports one pump at the middle water level to run high and low water levels, and two pumps run at the same time. No manual inspection is required, and the failure loss is completely bid farewell.